Chimney Company in Long Beach — Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price — and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Permits handled
Book My Appointment

Flat price quoted before we book

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 No Change Orders · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Long Beach, CA

Chimney repair in Long Beach is less about creosote and more about salt. The marine layer that rolls through Belmont Shore, Bluff Park, and Rose Park keeps masonry damp for months at a stretch, and decades of that moisture is what cracks crowns, spalls brick, and rusts dampers in the 1920s and 1930s homes that dominate this city. Prestige Chimney handles the full range: chimney sweep, chimney repair, and dryer vent cleaning, each under one roof. Call (833) 407-0587 when you need a straight answer about your flue.

Call (833) 407-0587

Why Long Beach Homes Are Different

Long Beach’s core neighborhoods, Belmont Shore, Bluff Park, Rose Park, the Willmore and Alamitos Beach areas, and the older tracts of 90804 through 90807, are built almost entirely on 1920s-1940s Spanish Revival and Craftsman bungalows. Those homes still carry their original brick or clay-tile chimneys with parged crowns. The problem is the ocean air. Cool, humid marine conditions keep the masonry wet much of the year, which produces spalling brick, efflorescence on the exterior, rusted dampers, and cracked crowns. Heavy creosote is rare here because most fireplaces see only occasional decorative use. What Long Beach homeowners actually face is water and salt damage to the flue and crown, which is a repair issue, not a sweeping issue.

The north side, 90805 and 90810, and the east side around 90808, add 1950s stucco tract homes with simpler single-flue masonry chimneys. Many detached garages and additions have secondary flues added by later owners. We regularly find orphaned flues from old water heaters that homeowners assume are fireplace chimneys. The dry Santa Ana episodes in fall and winter are when the few actively used fireplaces finally get burned, and that’s when an overdue inspection or a missing spark arrestor becomes an actual hazard.

Explore

Styles & brands we work with

Sweep & inspection
Sweep & inspection
Caps & crowns
Caps & crowns
Flue relining
Flue relining
Masonry repair
Masonry repair
Gas fireplace service
Gas fireplace service

Our Main Long Beach Services

Two services account for most of what Long Beach homeowners call us about: chimney sweeping for seasonal fireplaces and dryer vent cleaning for the fire hazard hiding behind the laundry room wall.

Chimney Sweep in Long Beach

A sweep in Long Beach typically means a fireplace that has sat unused since the previous winter and now needs its accumulated soot, any animal nesting, and debris cleared before the first Santa Ana fire. The humid marine air means we’re also checking for moisture intrusion at the crown and flashing while we’re up there. Homes near the water in Belmont Shore and Bluff Park add a layer of salt to the equation, which accelerates rust on dampers and caps. Full details on our Chimney Sweep in Long Beach page.

Chimney Sweep in Long Beach

Dryer Vent Cleaning in Long Beach

The U.S. Fire Administration identifies dryer vents as a leading appliance-related fire cause, and Long Beach bungalows often route dryer ducts through crawl spaces and tight wall cavities where lint clogs form out of sight. Older homes were never designed for modern high-efficiency dryers, so the vent runs are long, angled, and rarely cleaned. Our Dryer Vent Cleaning in Long Beach service covers the full duct path, and we’ll tell you plainly if the vent needs repair rather than just repeating a cleaning.

Dryer Vent Cleaning in Long Beach
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 407-0587

What happens when you call

  1. 1
    A real person answersNo phone trees — you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Chimney Repair in Long Beach

Chimney repair in Long Beach usually starts with water. Homes from the 1920s and 1930s in Belmont Shore, Bluff Park, and Rose Park have original clay-tile flues with mortared joints that crack from decades of ocean fog. That lets moisture into the chimney chase, which spalls the brick and rusts the damper from the inside out. Our team handles full Chimney Repair, from crown to flashing, and we spec materials from brands the trade actually trusts, including Gelco, Olympia Chimney, and Copperfield.

Chimney Cap Installation

Signs you need it

If you see water staining around the flue opening, hear birds or animals in the chimney, or find rusted metal at the top during a visual check, the cap is missing or failed.

What it costs in Long Beach

A new chimney cap in Long Beach typically runs $150 to $450 depending on the flue size and whether it’s a standard single-flue cap or a custom multi-flue unit for an older masonry stack.

How we do it

We measure the flue opening, select a cap matched to the chimney’s dimensions, set it with a secure mechanical or adhesive bond, and check that it sits level and clear of the flue path.

Chimney Flashing Repair

Signs you need it

Water stains on the ceiling near the chimney, damp masonry after rain, or visible gaps where the roof meets the chimney all point to failed or poorly fitted flashing.

What it costs in Long Beach

Flashing repair in Long Beach is typically $250 to $800 depending on whether the existing metal can be patched or the flashing needs full replacement around the chimney base.

How we do it

We inspect the existing flashing, remove corroded or poorly lapped pieces, cut and install new step or counter flashing, and seal the transition so water sheds away from the masonry.

Chimney Crown Repair

Signs you need it

A cracked, spalled, or missing crown lets water run directly into the chimney chase, which is the number one cause of interior masonry damage in Long Beach’s damp coastal air.

What it costs in Long Beach

Crown repair in Long Beach runs $350 to $1,200, with the higher end applying to full crown rebuilds on wide, multi-flue stacks common on 1920s homes.

How we do it

We chip away the failing mortar, form the crown with an overhang and drip edge so water sheds away from the flue, and pour or trowel on a mix rated for coastal exposure.

What Chimney Repair Costs in Long Beach

Item Typical range in Long Beach
Chimney cap $150 – $450
Flashing repair $250 – $800
Crown repair $350 – $1,200

How much does a chimney crown repair cost in Long Beach?

Crown repair in Long Beach typically runs $350 to $1,200. The price depends on the crown’s condition and whether it needs a full rebuild or a partial patch. Call (833) 407-0587 and we’ll give you an exact figure after looking at the chimney.

Can you repair a chimney without rebuilding the whole stack?

Yes. Most Long Beach chimneys we see need crown work, flashing replacement, or a new cap, not a full rebuild. We’ll tell you what’s actually failing and whether it can safely wait. Call (833) 407-0587 for an honest evaluation.

Brands We Service in Long Beach

We stock and install parts from Gelco, Olympia Chimney, Famco, and Copperfield. The same names chimney professionals specify nationwide are the ones on our service trucks in Long Beach, and we keep common cap and flashing sizes locally so a repair usually doesn’t wait on a shipped part. See our brands for the full list.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Pricing for Chimney Company in Long Beach, CA

Service Typical range in Long Beach
Chimney sweep $180 – $340
Chimney cap installation $150 – $450
Chimney flashing repair $250 – $800
Chimney crown repair $350 – $1,200
Dryer vent cleaning $150 – $300

What pushes a job toward the upper end in Long Beach is age and access. A 1920s clay-tile flue in Belmont Shore with a wide, multi-flue crown needs more material time than a 1950s single-flue stack in 90808. Salt corrosion on flashing and caps adds labor to removing rusted fasteners, and we quote that plainly before work starts. Every job is priced upfront, and nothing gets recommended without camera or visual evidence you can see for yourself.

Neighborhoods We Serve in Long Beach

We work the full stretch of Long Beach, from the shoreline bungalows to the inland tract homes. Most jobs can be scheduled within a week, and our team knows the common chimney configurations in each area well enough that the first visit is usually the only visit.

  • Belmont Shore
  • Bluff Park
  • Rose Park
  • Alamitos Beach
  • Naples Island

Service Area – Cities Near Long Beach

Prestige Chimney also serves homeowners just outside Long Beach proper. If you’re in Signal Hill, CA, Lakewood, CA, Compton, CA, or Los Alamitos, CA, the same team covers your chimney. The coastal materials and housing-era patterns don’t stop at the city line, and our estimate process works the same.

Serving Long Beach, CA — Our Local Coverage Area

We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Long Beach

Ready to get started? Free estimates · Photo-documented response in Long Beach
Call (833) 407-0587

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Long Beach Customers Say

★★★★★ 4.8 from 12+ reviews

"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."

— Kelly Hayes

"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."

— Alejandro Morales

"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."

— Darius Boyd

How It Works in Long Beach

Getting your chimney cleaning handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Long Beach — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Long Beach — we'll get back to you fast. No obligation.

When you submit this form, you agree to the terms of our Privacy Policy and consent to receive communications by phone, email, or text about your request, including by the independent contractors we may refer it to.

Prefer to text? Text Us
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch